LP1230T

LP1230: 1230 Litre Deso Single Skin Heating Oil Tank

1230 Litre (Approx 270 Gallons) single skin kerosene storage tank.

This quality Deso single skin heating oil tank is ideal for the storage of home heating oil.

Benefits:
Corrosion resistant, 2 year guarantee (subject to conditions), High impact strength, UV stabilised

REQUIRE INSTALLATION?BUY NOW

View Fill Table
View Performance Declaration
View Drawings

Category: Single Skin Tanks

Specifications

Capacity: 1230 Litres (270 gallons)
Tank Type: Single Skin
Length: 1900mm (6′ 3″)
Height: 860mm (2′ 10″)
Width: 1240mm (4′ 1″)
Footprint: 1050mm x 1750mm (4′ 7″ x 5′ 9″)
Weight: 55kg
Certificate Number: 0668060207

Optional Extras (pictured)

Top Outlet Kit
The Environment Agency in their Pollution Prevention Guideline PPG2 prefer top outlet tanks and the guidelines specify anti-siphon valve to be installed. Contact us for more information.

Filter and Isolating Valve
(bottom outlet only)

Remote Monitoring
Watchman Sonic Transmitter

Sealants
Sealants for installation

Deso Single Skinned Tanks 2 year Guarantee

Deso Single Skinned Tanks ate OFTEC certified and comply fully with the latest Environment Agency Regulations. All tanks are manufactured from high grade polyethylene and are supplied with moulded in fittings. All our single skinned tanks come standard with a 1” female outlet and ‘O’ ring seal for unsurpassed protection against leaks.

Our tanks are compatible with the latest electronic alarms which are available on request.

Additional Info

Is a single skin tank suitable?	For some DOMESTIC oil tank installations (in England and Scotland, NOT Wales) fitting a single skin oil tank can be suitable solution. In ALL cases, an 'oil storage risk assessment' should be carried out to determine the correct tank and installation (this can be carried out by an OFTEC approved engineer). In brief a Bund or Bunded Tank is required in domestic situations if: Your tank is in Wales. You are storing over 2500 litres. Your tank is near an open drain or loose-fitting manhole. Your tank is within 10m of controlled water such as a river, stream etc. Your tank is located where any spillage could travel over hard ground to reach controlled water. Your tank is located within 50m of a borehole, spring or well. Your tank vent is not visible from the fill point (such as an extended fill point) Your oil use is for a building other than a single-family dwelling. Any other unique hazards to your site. ALL DOMESTIC oil tanks over 2500 litres need to be bunded. All NON-DOMESTIC oil tanks over 200 litres need to be bunded.

Is a single skin tank suitable?

For some DOMESTIC oil tank installations (in England and Scotland, NOT Wales) fitting a single skin oil tank can be suitable solution.

In ALL cases, an 'oil storage risk assessment' should be carried out to determine the correct tank and installation (this can be carried out by an OFTEC approved engineer).

In brief a Bund or Bunded Tank is required in domestic situations if:

Your tank is in Wales.
You are storing over 2500 litres.
Your tank is near an open drain or loose-fitting manhole.
Your tank is within 10m of controlled water such as a river, stream etc.
Your tank is located where any spillage could travel over hard ground to reach controlled water.
Your tank is located within 50m of a borehole, spring or well.
Your tank vent is not visible from the fill point (such as an extended fill point)
Your oil use is for a building other than a single-family dwelling.
Any other unique hazards to your site.

ALL DOMESTIC oil tanks over 2500 litres need to be bunded.
All NON-DOMESTIC oil tanks over 200 litres need to be bunded.

Warranty

For all warranty information, Click here